|
Characterisation of a Resonant Ultrasound Spectroscope (2020/21) |
Marc Desmulliez |
Advanced Mechanical Engineering, Vision, Image and Signal Processing |
|
Design, manufacturing and performance characterisation of a capacitive inclinometer (2020/21) |
Marc Desmulliez |
Advanced Mechanical Engineering |
|
My project proposal |
|
Advanced Mechanical Engineering, Applied Data Science, Brewing and Distilling, Brewing and Distilling with Entrepreneurship, Energy, Photonics and Optoelectronic Devices, Renewable Energy and Distributed Generation, Renewable Energy Engineering, Robotics, Autonomous and Interactive Systems, Stochastic Modelling and Computational Data Science, Vision, Image and Signal Processing |
|
Projects in Laser Engineering, Additive Manufacture or Medical Applications |
Dr Jonathan Shephard |
Advanced Mechanical Engineering, Energy, Renewable Energy Engineering |
|
Capsulues for delayed-burst delivery of vaccines |
Ferry Melchels |
Advanced Mechanical Engineering |
|
Surface and Motion Tracking and Modelling for Biomechanical and Clinical Applications |
Dr. Yuhang Chen |
Advanced Mechanical Engineering |
|
Inverse Problem in Mechanics-based Cancer Detection |
Dr Yuhang Chen |
Advanced Mechanical Engineering |
|
Development of flow cell reactor for solar rechargeable redox flow battery applcation (2022) |
Dowon Bae |
Advanced Mechanical Engineering, Energy, Renewable Energy Engineering |
|
Solar thermal collector design for redox flow battery system (2022) |
Dowon Bae |
Advanced Mechanical Engineering, Energy, Renewable Energy Engineering |
|
Packed Columns, Produced Water Treatment, and multiphase problems |
Graeme White |
Advanced Mechanical Engineering, Energy, Energy with Entrepreneurship, Global Sustainability, Renewable Energy Engineering |
|
Mini-mechanics |
Bob Reuben |
Advanced Mechanical Engineering, Energy |
|
Modelling Gas Flows in Porous Media using new Continuum Approach in OpenFOAM |
Dr. S Kokou Dadzie |
Advanced Mechanical Engineering, Applied Data Science, Energy, Global Sustainability, Renewable Energy and Distributed Generation, Renewable Energy Engineering, Stochastic Modelling and Computational Data Science |
|
vortex shedding: Vortex Induced Vibration |
Dr. S Kokou Dadzie |
Advanced Mechanical Engineering, Applied Data Science, Energy, Global Sustainability, Renewable Energy and Distributed Generation, Renewable Energy Engineering |
|
Evaluation of some Multiphase Flow Solvers in OpenFOAM |
Dr. S Kokou Dadzie |
Advanced Mechanical Engineering, Applied Data Science, Energy, Global Sustainability, Renewable Energy and Distributed Generation, Renewable Energy Engineering, Stochastic Modelling and Computational Data Science |
|
Evaluation of various numerical codes in rarefied hypersonic regimes |
Dr. S Kokou Dadzie |
Advanced Mechanical Engineering, Energy, Energy with Entrepreneurship, Global Sustainability, Renewable Energy Engineering, Robotics, Autonomous and Interactive Systems, Stochastic Modelling and Computational Data Science |
|
Direct air capture of CO2 |
Mijndert van der Spek |
Advanced Mechanical Engineering, Energy, Energy with Entrepreneurship, Global Sustainability, Renewable Energy and Distributed Generation, Renewable Energy Engineering |
|
Projects in the areas of CFD / thermal systems / fire modelling / dynamical systems |
Peter Cumber |
Advanced Mechanical Engineering, Energy, Renewable Energy Engineering |
|
Projects in Additive manufacturing (3D printing) of metals |
Prof. A.J. Moore |
Advanced Mechanical Engineering |
|
3D printing by stereolithography with ceramic additives |
Jose Marques-Hueso |
Advanced Mechanical Engineering, Energy, Photonics and Optoelectronic Devices, Renewable Energy and Distributed Generation, Renewable Energy Engineering, Robotics, Autonomous and Interactive Systems, Vision, Image and Signal Processing |
|
Biomedical devices |
Maiwenn Kersaudy-Kerhoas |
Advanced Mechanical Engineering |
|
Design and manufacturing of a microfluidic chip for an integrated ctDNA enrichment assay |
Maiwenn Kersaudy-Kerhoas |
Advanced Mechanical Engineering |
|
Integrated acoustic cell lysis module for point-of-care format |
Maiwenn Kersaudy-Kerhoas |
Advanced Mechanical Engineering, Applied Data Science |
|
Numerical prediction of CO2 leakage from storage reservoir under seabed |
Baixin Chen |
Advanced Mechanical Engineering, Energy, Renewable Energy Engineering |
|
Prediction of CO2/CH4 droplet/bubble dispersion and dissolution in seawater |
Baixin Chen |
Advanced Mechanical Engineering, Energy, Renewable Energy Engineering |
|
Process intensification: Granular rheology. |
Dr Victor Francia |
Advanced Mechanical Engineering, Energy, Renewable Energy Engineering |
|
Energy efficiency: Modelling dynamic fouling. |
Dr Victor Francia |
Advanced Mechanical Engineering, Energy, Renewable Energy Engineering |
|
Towards a low cost precision VR systems using pervasive technologies (2014-15) (2014-15) (2015-16) (2015-16) |
Dr. Theo Lim |
Advanced Mechanical Engineering, Robotics, Autonomous and Interactive Systems |
|
Sensorial perception (2014-15) (2014-15) (2015-16) (2015-16) |
T. Lim |
Advanced Mechanical Engineering, Robotics, Autonomous and Interactive Systems, Vision, Image and Signal Processing |
|
Printing 4D tangible interfaces (2014-15) (2014-15) (2015-16) (2015-16) |
Dr. T. Lim |
Advanced Mechanical Engineering, Robotics, Autonomous and Interactive Systems, Vision, Image and Signal Processing |
|
Digital twins and proxies for Integrated Safety Compliant Edge Robotics (ISCER) |
Theo Lim |
Advanced Mechanical Engineering, Applied Data Science, Brewing and Distilling, Brewing and Distilling with Entrepreneurship, Energy, Renewable Energy and Distributed Generation, Renewable Energy Engineering, Robotics, Autonomous and Interactive Systems, Stochastic Modelling and Computational Data Science, Vision, Image and Signal Processing |
|
Understanding Ballistic Impact Behaviour in Polymers (2015-16) |
David Bucknall |
Advanced Mechanical Engineering |
|
Design and development of flexible strain gauge sensor |
Michael Crichton |
Advanced Mechanical Engineering |
|
Projects in Wind energy/ Tidal energy / Energy networks / Microgrids / .... (2020/21) |
Wolf-Gerrit Fruh |
Advanced Mechanical Engineering, Energy, Renewable Energy Engineering |
|
Sport performance monitoring uising wearable sensors |
Dr Morteza Amjadi |
Advanced Mechanical Engineering, Robotics, Autonomous and Interactive Systems |
|
Laser manufacturing of soft sensors and robots |
Dr Morteza Amjadi |
Advanced Mechanical Engineering, Robotics, Autonomous and Interactive Systems |
|
Wearable biomedical sensors |
Dr Morteza Amjadi |
Advanced Mechanical Engineering |
|
Improvement of an assembly system for miniaturized products |
Dr Xianwen Kong |
Advanced Mechanical Engineering, Robotics, Autonomous and Interactive Systems |
|
Assembly of CPV (Concentrator photovoltaics) cells for a 1025-cell CPV solar panel |
Xianwen Kogn |
Advanced Mechanical Engineering, Robotics, Autonomous and Interactive Systems |
|
Improvement of a disassembly-free reconfigurable parallel manipulator |
Xianwen Kong |
Advanced Mechanical Engineering, Robotics, Autonomous and Interactive Systems |
|
Mechanical design and analysis of a baseplate and housing for an optical system |
Ross Donaldson |
Advanced Mechanical Engineering, Robotics, Autonomous and Interactive Systems |
|
The thermal impact of laser ablation during minimal invasive surgery of biologic hard and soft tissues |
Uwe Wolfram |
Advanced Mechanical Engineering, Applied Data Science, Photonics and Optoelectronic Devices, Stochastic Modelling and Computational Data Science, Vision, Image and Signal Processing |
|
Hidden cracks: Early diagnosis of osteoarthritic bone using multimodal image-based computational models |
Uwe Wolfram |
Advanced Mechanical Engineering, Applied Data Science, Stochastic Modelling and Computational Data Science, Vision, Image and Signal Processing |
|
Combat climate change using Minecraft-style computational models |
Uwe Wolfram |
Advanced Mechanical Engineering, Applied Data Science, Stochastic Modelling and Computational Data Science, Vision, Image and Signal Processing |
|
Inhalers: Personalised treatments for children to elderly |
Uwe Wolfram and Ali Ozel |
Advanced Mechanical Engineering, Applied Data Science, Stochastic Modelling and Computational Data Science, Vision, Image and Signal Processing |
|
Helping bone to heal: Computational analysis of bone-biomaterial mechanics |
Uwe Wolfram |
Advanced Mechanical Engineering, Applied Data Science, Stochastic Modelling and Computational Data Science, Vision, Image and Signal Processing |
|
In vivo subtalar joint contact forces during eversion to inversion motion |
Uwe Wolfram |
Advanced Mechanical Engineering, Applied Data Science, Stochastic Modelling and Computational Data Science, Vision, Image and Signal Processing |
|
Temperature profile analysis for solar-rechargeable redox flow cell |
Dowon Bae |
Advanced Mechanical Engineering, Energy, Renewable Energy Engineering |
|
Development of 3D Printed Flow Reactors for Photochemical Processes |
Filipe Vilela |
Advanced Mechanical Engineering, Applied Data Science, Renewable Energy and Distributed Generation |
|
Preschool and primary engineering (2020/21) |
Helen Bridle |
Advanced Mechanical Engineering, Applied Data Science, Brewing and Distilling, Brewing and Distilling with Entrepreneurship, Energy, Photonics and Optoelectronic Devices, Renewable Energy and Distributed Generation, Renewable Energy Engineering, Robotics, Autonomous and Interactive Systems, Stochastic Modelling and Computational Data Science, Vision, Image and Signal Processing |
|
Ultrafast CCRM camera and applications-data processing (2021/22) |
Dr Xu Wang |
Advanced Mechanical Engineering, Applied Data Science, Photonics and Optoelectronic Devices, Robotics, Autonomous and Interactive Systems, Stochastic Modelling and Computational Data Science, Vision, Image and Signal Processing |
|
Ultrafast CCRM camera and applications-Experimental (2021/22) |
Dr. Xu Wang |
Advanced Mechanical Engineering, Applied Data Science, Photonics and Optoelectronic Devices, Robotics, Autonomous and Interactive Systems, Vision, Image and Signal Processing |
|
Underwater optical communication-FPGA (2021/22) |
Dr Xu Wang |
Advanced Mechanical Engineering, Applied Data Science, Photonics and Optoelectronic Devices, Robotics, Autonomous and Interactive Systems, Vision, Image and Signal Processing |
|
Underwater optical communication-optical (2021/22) |
Dr Xu Wang |
Advanced Mechanical Engineering, Applied Data Science, Photonics and Optoelectronic Devices, Robotics, Autonomous and Interactive Systems, Vision, Image and Signal Processing |
